Parking lamp

Mitch · Motorer

Parking lamp

Pamlico · Motorer

Not to be snarky, but have you checked the owner's manual for instructions? Page 122 of the on line version makes it sound pretty simple (but I may have confused the bulb you're referring to):

Parking lamps and standing lamps
5 watt bulb
The parking lamps and standing lamps are integrated in the lamp housing of the turn
signal indicator.

- Open the bonnet
- Reach into the opening for the turn signal indicators from above

1. Turn the bulb holder to the left and pull out
2. Remove and replace the bulb

Mitch · Motorer

Yes I have seen the directions and it seems very easy... but it won't turn on either side.

Pamlico · Motorer

So you've removed the bulb holder but the bulb itself is frozen in place?

Mitch · Motorer

No I can't get the bulb holder out, all I can do is get the plug off.

SPDinNY · Motorer

it is probably melted in there =/

Mitch · Motorer

I will have to go into towne to have it looked at. I think with my little snafoo the passenger side one got replaced so I would assume that one would not be melted in yet. Probably some strange trick I can't figure out.